１.Green and safty:
The film with no toxic , no smell , no benzene.
It will not occur any pollution gas and material during the
laminating process , anti-fire which caused by the use and storage
of flammable solvent .
The film is with brilliant bonding and strong ability of absorbing
powder. It improves printings color saturation and brightness,
prevent the printings from blistering after die cutting
&bumping. Matt thermal lamination film is applied for part UV
coating , hot stamping, etc.
it is easy to operate once the required temperature is met and no
special technique is required
４. Efficient and energy-saving:
Production is reduced substantially as there is no film wastage,
mixture of adhesive solvent, and no UV heating lamp is required.
５. Adaptable to different kinds of machines:
This is widely used in dry laminator and wet laminator. Small
adjustments need to be made to the machine if the film is used in
Equipment for laminating film: dry and wet laminating film machine
Temperature: normal: 85-100°C; special: 100-110°C
Roller pressure: 8-15MPa
Remarks: special laminations are those with thicker ink, solid
color, high moisture content and bigger size paper
- Adjust roller pressure and temperature according to different types
of paper and ink.
- When first time using the film or changing the printing material
& technological conditions , we recommend a small volume trial
before large quantity using.
- The following situation will cause the poor quality of the film
- Use the metal ink.
- The ink contains too much wax, dried oil , adhesive and silicon
- The ink is too thick
- The ink is not completely dry
- When the paper contains too much moisture
- Dusting too powder